if placed by 12PM EST
Free US Shipping on orders over $25
Bosshead holds rods up to 15mm in diameter Adjustable jaws hold objects up to 90mm in width Cork lined jaws Perfect for test tubes, burettes, or f...
View full detailsHIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a 60cm rod m...
View full detailsLAB-GRADE || Industrial, laboratory quality metalware set includes essential metal equipment for any lab INCLUDED || Blue powder coated support st...
View full detailsPVC coated jaws open to 90mm Attaches to rods up to 15mm in diameter Diecasted alloy clamp retort, PVC coated jaws with boss head which accomodat...
View full detailsAll metal material Accepts rods up to 3/4" in diameter Center adjusts to allow for different angles other than perpendicular Perfect universal lab...
View full detailsStrong, stable support for lab equipment 6" by 5" area Maximum height is 10", minimum is 2" Maximum load is 55lbs Laboratory Scissor Jack - 6" by...
View full detailsHIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a 100cm rod ...
View full detailsHIGH QUALITY || 30cm rod made of high quality steel STABILITY || Rod measures 12" tall and 12mm in diameter- Provides superb stability for experim...
View full detailsINDUSTRIAL / RESEARCH GRADE QUALITY || Made from high grade Zinc Alloy, finished with non toxic powder coating. Non-ferrous, rust free & long ...
View full detailsHIGH QUALITY || Pack of 12 lattice support clamps that fit rods up to 12.5mm in diameter VARIOUS FINISHES || Clamps are made of high quality metal...
View full detailsJumbo sized clamp holder Fits rods 5mm-20mm in diameter Plastic cap tightening screws with grip allows for easy adjustment Universal Clamp Holde...
View full detailsHIGH QUALITY || Triangular tripod retort base made of chemical-resistant cast iron with a black coating STABILITY || The 4" long by 4" wide 3-poin...
View full detailsINDUSTRIAL / RESEARCH GRADE QUALITY || Made from high grade metal alloy, finished with non toxic powder coating. Non-ferrous, rust free & long...
View full detailsRESEARCH QUALITY || This ultimate laboratory starter set includes a rod, base, tong, stand, clamp and more COMPLETE KIT || Test tube/lab instrumen...
View full detailsDie casted alloy clamp with metal clamping screws Accommodates both square and round rods up to 16mm in thickness Can also be used to hold flat ar...
View full detailsBoss head holds rods up to 15mm in diameter Adjustable jaws hold objects up to 60mm in width 1" cork lined jaws Perfect for test tubes, burettes, ...
View full detailsINDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...
View full detailsThis burette clamp has high strength alloy jaws suitable for all burettes up to 100mL. Is available as single or double.
Rubber lined jaws 15mm to 45mm opening Rods up to 13mm in diameter Holds test tubes or burettes Round clamp features PVC dipped steel jaws which o...
View full detailsHIGH QUALITY || Rod and base set consisting of a rectangular retort base made of chemical-resistant cast iron with a blue coating and a 60cm rod m...
View full detailsINDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...
View full detailsINDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...
View full detailsINDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...
View full detailsThis series of boss head rod clamps are perfect for various lab and home uses. They all fit rods up to 16mm in diameter with different finishes an...
View full detailsHIGH QUALITY || Rectangular retort base made of corrosion resistant, powder coated pressed steel STABILITY || The 8" long by 5" wide base weigh...
View full detailsAdjustable jaws hold objects up to 60mm in width Fitted with 15cm long steel rod Cork lined jaws Perfect for test tubes, burettes, or flasks EISC...
View full detailsEisco Labs 2.5" Retort Ring Closed with 6.5" stem Stainless Steel Retort Ring 0.25" diameter rod Inside Diameter of ring 2" Total Length is 9.125"...
View full detailsINDUSTRIAL QUALITY || High performance, heavy duty multi-purpose table clamp. It's versatile design allows you to secure a wide variety of laborat...
View full detailsHIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a 50cm rod m...
View full detailsOverall all length 25cm Maximum clamp opening 10cm Rubber coated, chemical resistant prongs All metal construction with threaded steel actuating j...
View full detailsHIGH QUALITY || 100cm rod made of high quality stainless steel STABILITY || Rod measures 39.5" tall and 12mm in diameter- Provides superb stabilit...
View full detailsHIGH QUALITY || 50cm rod made of high quality steel STABILITY || Rod measures 19.8" tall and 12mm in diameter- Provides superb stability for exper...
View full detailsHIGH QUALITY || This laboratory set includes retort base made of corrosion resistant, powder coated steel, a stainless steel rod featuring a 10mm ...
View full detailsSteel burette double clamp, capable of holding one or two burettes simultaneously Rubber coated clamp jaws keep burettes safe but secure Clamp hol...
View full detailsPVC coated with boss head. Overall length 27 cm.PVC coated with boss head. Overall length 27 cm.
3 Prong, Powder coated clamp Over all Length 10" Prongs have 2" of PVC coating. Clamping tommy-bar screw through swivels, Clamping tommy-bar screw...
View full details6" Out side diameter cast Iron 5/16" diameter Ring with Boss Head clamp Boss head fitted with thumb-screw to accept rods from 5/16" to 5/8" dia Ex...
View full details4" Out side diameter cast Iron 5/16" diameter Ring with Boss Head clamp Boss head fitted with thumb-screw to accept rods from 5/16" to 5/8" dia Ex...
View full detailsSteel, 10 cm dia. in steel with 8 mm dia. stem and 12.5 cmSteel, 10 cm dia. in steel with 8 mm dia. stem and 12.5 cm in length, finished in grey / ...
View full detailsAluminum alloy clamp with plastic clamping screws Accommodates both square and round rods up to 16mm in thickness Can also be used on table edges ...
View full detailsHIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a 60cm rod m...
View full detailsMade of plated mild steel Inner diameter is 7.5 cm Ring and rod are integrated with boss head clamp From vertical rod connecting point to end of r...
View full detailsHIGH QUALITY || This laboratory set includes retort base made of corrosion resistant, powder coated steel, a stainless steel rod featuring a 10mm ...
View full detailsHIGH QUALITY || Rectangular retort base made of corrosion resistant, powder coated pressed steel - Features rubber strips to protect surfaces STAB...
View full detailsINDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...
View full detailsINDUSTRIAL / RESEARCH GRADE QUALITY || Made from high grade metal alloy, finished with non toxic powder coating. Non-ferrous, rust free & long...
View full detailsINDUSTRIAL / RESEARCH GRADE QUALITY || Made from high grade Zinc Alloy, finished with non toxic powder coating. Two stainless steel thumb screws. ...
View full detailsHIGH QUALITY || Triangular tripod retort base made of chemical-resistant cast iron with a black coating STABILITY || The 6" long by 6" wide 3-poin...
View full details